Foreign Material Exclusion
Turn FME checklists into accurate, synced digital zone control
Capture, inspect and close out Foreign Material Exclusion zones from mobile or desktop, with guided entry, photo documentation and structured zone tracking.
THE OPERATIONAL CHALLENGE
Paper FME logs can't keep up with the plant
Enter once. Verify in seconds. Close out with confidence.
TAShelix FME
Paper and spreadsheet FME logs do what they do, but they can't guide consistent inspections, validate item counts against a zone boundary, or sync automatically with work management and outage systems. That manual re-entry introduces errors, delays zone closeout, and leaves supervisors without a clear view of open boundaries as work happens.
HOW TASHELIX SUPPORTS THE WORKFLOW
Field checks become accurate, synced FME records
One connected workflow from zone setup to closeout. Individual and plant-wide FME zones are captured on mobile or desktop, verified against boundary logs, and synced directly with work management and outage systems, with no manual re-entry.
KEY CAPABILITIES
01
Simple mobile FME entry
Log zone setups, item counts and inspections from any device in seconds, with guided entry that keeps every check consistent.
02
Individual and plant-wide zone tracking
Scale from a single component boundary to large outage-wide FME zones without added administrative work.
03
Visual, real-time reporting
See open zones, item counts and inspection status in clear visual dashboards as work happens, not at the end of the shift.
04
Photo-based documentation
Capture and attach photos of barriers, covers and item counts directly to each FME record for a complete visual audit trail.
05
Direct work management sync
Sync captured FME data directly with work management, outage and asset systems for closeout and reporting.
06
Field-to-office visibility
Connect field operations and outage management with one shared, attributable record of every zone and item.
HOW IT WORKS
From logged zone activity to a synced closeout record
01
Establish the zone
Workers set up and log FME zone boundaries from the field or office, on mobile or desktop, online or offline.
02
Log items and materials
Tools, parts and materials entering or leaving the zone are logged against the boundary record as work proceeds.
03
Inspect and verify
Supervisors get instant visibility into zone status and verify item counts and boundary integrity in seconds.
04
Validate against checklists
Inspections are checked against standardized FME checklists and closure criteria before sign-off.
05
Close out and sync
Verified closeout data syncs directly with work management, outage and asset systems.
06
Report and analyze
Retained, attributable FME records support trending, audits and continuous program improvement.
OPERATIONAL OUTCOMES
Faster zone verification and closeout, fewer missed items, and one attributable record of every zone, item and inspection.
Less reliance on paper logs, spreadsheets or limited desktop applications
Faster zone verification and closeout cycles
Fewer missed items and manual transcription errors
Better visibility across individual zones and plant-wide outages
Less administrative handling between inspection and closeout
One attributable record of every zone, item and inspection
BEST FOR AND WHERE IT FITS
Operations, maintenance and outage teams, from individual work areas to plant-wide outages, who need simple, mobile FME zone control with direct sync to work management and asset systems.
GOVERNANCE, INTEGRATION AND AUDIT
Direct sync with work management, outage and asset systems
Secure, cloud-based access from anywhere, online or offline
Role-based approval routing and configurable access profiles
Attributable FME records with timestamps for audit and trending
Retained FME records supporting trending, audits and program improvement
Move from dated paper FME logs to synced mobile digital zone control.
See how TAShelix FME can support zone setup, item tracking, inspection and auditable closeout in one workflow.
Foreign Material Exclusion
Turn FME checklists into accurate, synced digital zone control
Capture, inspect and close out Foreign Material Exclusion zones from mobile or desktop, with guided entry, photo documentation and structured zone tracking.
THE OPERATIONAL CHALLENGE
Paper FME logs can't keep up with the plant
Enter once. Verify in seconds. Close out with confidence.
TAShelix FME
Paper and spreadsheet FME logs do what they do, but they can't guide consistent inspections, validate item counts against a zone boundary, or sync automatically with work management and outage systems. That manual re-entry introduces errors, delays zone closeout, and leaves supervisors without a clear view of open boundaries as work happens.
HOW TASHELIX SUPPORTS THE WORKFLOW
Field checks become accurate, synced FME records
One connected workflow from zone setup to closeout. Individual and plant-wide FME zones are captured on mobile or desktop, verified against boundary logs, and synced directly with work management and outage systems, with no manual re-entry.
KEY CAPABILITIES
01
Step-by-step execution
Guide users through the approved sequence with clear instructions and controlled progression.
02
Conditional logic
Show or skip steps based on responses, field conditions or procedural rules.
03
Data and evidence
Collect readings, comments, photos, attachments, timestamps and signatures within the procedure.
04
Validation and hold points
Require specific values, approvals or checks before the user can continue.
05
Cross-platform access
Ensure teams execute the current approved procedure and preserve the record of the version used.
06
Cross-platform access
Ensure teams execute the current approved procedure and preserve the record of the version used.
HOW IT WORKS
From logged zone activity to a synced closeout record
01
Establish the zone
Workers set up and log FME zone boundaries from the field or office, on mobile or desktop, online or offline.
02
Log items and materials
Tools, parts and materials entering or leaving the zone are logged against the boundary record as work proceeds.
03
Inspect and verify
Supervisors get instant visibility into zone status and verify item counts and boundary integrity in seconds.
04
Validate against checklists
Inspections are checked against standardized FME checklists and closure criteria before sign-off.
05
Close out and sync
Verified closeout data syncs directly with work management, outage and asset systems.
06
Report and analyze
Retained, attributable FME records support trending, audits and continuous program improvement.
OPERATIONAL OUTCOMES
Faster zone verification and closeout, fewer missed items, and one attributable record of every zone, item and inspection.
Less reliance on paper logs, spreadsheets or limited desktop applications
Faster zone verification and closeout cycles
Fewer missed items and manual transcription errors
Better visibility across individual zones and plant-wide outages
Less administrative handling between inspection and closeout
One attributable record of every zone, item and inspection
BEST FOR AND WHERE IT FITS
Operations, maintenance and outage teams, from individual work areas to plant-wide outages, who need simple, mobile FME zone control with direct sync to work management and asset systems.
GOVERNANCE, INTEGRATION AND AUDIT
Direct sync with work management, outage and asset systems
Secure, cloud-based access from anywhere, online or offline
Role-based approval routing and configurable access profiles
Attributable FME records with timestamps for audit and trending
Retained FME records supporting trending, audits and program improvement
Move from dated paper FME logs to synced mobile digital zone control.
See how TAShelix FME can support zone setup, item tracking, inspection and auditable closeout in one workflow.
Foreign Material Exclusion
Turn FME checklists into accurate, synced digital zone control
Capture, inspect and close out Foreign Material Exclusion zones from mobile or desktop, with guided entry, photo documentation and structured zone tracking.
THE OPERATIONAL CHALLENGE
Paper FME logs can't keep up with the plant
Enter once. Verify in seconds. Close out with confidence.
TAShelix FME
Paper and spreadsheet FME logs do what they do, but they can't guide consistent inspections, validate item counts against a zone boundary, or sync automatically with work management and outage systems. That manual re-entry introduces errors, delays zone closeout, and leaves supervisors without a clear view of open boundaries as work happens.
HOW TASHELIX SUPPORTS THE WORKFLOW
Field checks become accurate, synced FME records
One connected workflow from zone setup to closeout. Individual and plant-wide FME zones are captured on mobile or desktop, verified against boundary logs, and synced directly with work management and outage systems, with no manual re-entry.
KEY CAPABILITIES
01
Simple mobile FME entry
Log zone setups, item counts and inspections from any device in seconds, with guided entry that keeps every check consistent.
02
Individual and plant-wide zone tracking
Scale from a single component boundary to large outage-wide FME zones without added administrative work.
03
Visual, real-time reporting
See open zones, item counts and inspection status in clear visual dashboards as work happens, not at the end of the shift.
04
Photo-based documentation
Capture and attach photos of barriers, covers and item counts directly to each FME record for a complete visual audit trail.
05
Direct work management sync
Sync captured FME data directly with work management, outage and asset systems for closeout and reporting.
06
Field-to-office visibility
Connect field operations and outage management with one shared, attributable record of every zone and item.
HOW IT WORKS
From logged zone activity to a synced closeout record
01
Establish the zone
Workers set up and log FME zone boundaries from the field or office, on mobile or desktop, online or offline.
02
Log items and materials
Tools, parts and materials entering or leaving the zone are logged against the boundary record as work proceeds.
03
Inspect and verify
Supervisors get instant visibility into zone status and verify item counts and boundary integrity in seconds.
04
Validate against checklists
Inspections are checked against standardized FME checklists and closure criteria before sign-off.
05
Close out and sync
Verified closeout data syncs directly with work management, outage and asset systems.
06
Report and analyze
Retained, attributable FME records support trending, audits and continuous program improvement.
OPERATIONAL OUTCOMES
Faster zone verification and closeout, fewer missed items, and one attributable record of every zone, item and inspection.
Less reliance on paper logs, spreadsheets or limited desktop applications
Faster zone verification and closeout cycles
Fewer missed items and manual transcription errors
Better visibility across individual zones and plant-wide outages
Less administrative handling between inspection and closeout
One attributable record of every zone, item and inspection
BEST FOR AND WHERE IT FITS
Operations, maintenance and outage teams, from individual work areas to plant-wide outages, who need simple, mobile FME zone control with direct sync to work management and asset systems.
GOVERNANCE, INTEGRATION AND AUDIT
Direct sync with work management, outage and asset systems
Secure, cloud-based access from anywhere, online or offline
Role-based approval routing and configurable access profiles
Attributable FME records with timestamps for audit and trending
Retained FME records supporting trending, audits and program improvement
Move from dated paper FME logs to synced mobile digital zone control.
See how TAShelix FME can support zone setup, item tracking, inspection and auditable closeout in one workflow.